PLAN REV 1.4MILESTONES 14COMPONENTS 26UPDATED 2026-11-18LICENSE CC BY-SA 4.0
Why the plan changed

Design decisions

Every significant change to the plan's design, with the reason, the date, and the sources behind it. When the plan changes, the old choice and the reasoning stay on record here.
DD-001 · Adopted · 2026-11-18

Lunar power grid: switch from ±4 kV DC to 3 kV AC, 3-phase, 1 kHz

Affects: M04, C04.4, C04.1, C04.2, C07.1, C08.1

Was±4 kV DC transmission trunk with stacked DC–DC converters at every source and user.
Now3 kV AC, 3-phase, 1 kHz transmission trunk. Transformers step voltage up and down, and Universal Modular Interface Converters (UMICs) connect 120 V DC equipment and microgrids to it.
WhyTo match NASA's own lunar grid baseline, which NASA chose because DC cannot yet be raised to the needed voltage with radiation-hard parts.

What NASA found, and when

DateWhat happenedSource
Feb 2022NASA Glenn reviews lunar power transmission for the 40 kW Fission Surface Power system. It finds high-voltage metal cable the best option and lays out the AC and DC hardware challenges, but states it is not a NASA preference. Open Moon's original ±4 kV DC choice came from this paper.Barth & Pike, Lunar Power Transmission for Fission Surface Power (NETS-2022)
Aug 2022NASA Glenn's grid trade study compares 1.2–6 kV, DC and 3-phase AC, at 60 Hz to 1 kHz. It finds 1 kHz the lightest AC option and selects 3 kV AC as the mass-optimal feasible design.Thomas, Granger, Csank & Gardner, Establishing a Lunar Surface Power Grid (APS4DS 2022)
Sep 2023NASA publishes the Universal Modular Interface Converter (UMIC), which connects 120 V DC space equipment to a 3 kV AC grid at 1 kHz. It is built from standard 1 kW inverter modules, with targets of over 85% transmission efficiency and under 0.55 kg/m.Thomas et al., A Modular AC to DC Interface Converter to Enable Lunar Surface Power Transmission (AIAA ASCEND 2023)
2025NASA/DOE's government reference design for a 40 kWe lunar fission system uses a 3 kVac, 1 kHz link to a user interface 1 km away. NASA says it was selected to leverage the UMIC, and that AC offered advantages over DC for this application.Mason et al., Key Design Trades for a Near-term Lunar Fission Surface Power System (NETS 2025)
Dec 2025NASA tests AC power cables at several frequencies in vacuum with lunar regolith simulant, coiled, buried and separated. It finds no major losses from the regolith, and the choice of frequency did not change the results.Klopp, Thomas & Csank, An Experimental Study of Losses in High Voltage AC Lunar Power Cables (SciTech 2026)

In NASA's words

“DC grid practically limited to 1.2-1.5 kV, due to lack of high voltage rad-hard switches”
— NASA, Establishing a Lunar Surface Power Grid (2022), trade study conclusions
“AC easier to increase voltage and expand, as transformers can change voltage in AC-DC designs … These facts drove team to select AC”
— NASA, Establishing a Lunar Surface Power Grid (2022)
“1 kHz had lowest mass”
— NASA, Establishing a Lunar Surface Power Grid (2022), radial architecture results
“The 3 kVac, 1 kHz long-distance power transmission approach was selected to leverage the Universal Modular Interface Converter (UMIC) technology”
— NASA, Key Design Trades for a Near-term Lunar Fission Surface Power System (NETS 2025)
“Reducing the transmission voltage from 3 kVac to 1 kVac resulted in a 1442 kg user interface pallet, an increase of 570 kg … There was no mass benefit to increasing the voltage above 3 kVac”
— NASA, Key Design Trades for a Near-term Lunar Fission Surface Power System (NETS 2025)

Trade-offs Open Moon accepts

  • NASA's own study says DC transmission is significantly lighter than AC above 3–4 kV. Open Moon accepts heavier cable to use parts that can actually be built and radiation-qualified.
  • NASA's 2025 reference lists 325 kg for a 1 km main cable and spool. This is heavier than the ~240 kg per 3 km DC cable Open Moon assumed before, so M04's grid delivery mass rises from ~1 t to ~2 t.
  • NASA notes that much longer grids beyond Artemis scale may need a lower frequency to avoid stability and propagation problems. The 3 kV, 1 kHz choice suits links of a few kilometres.
  • The Brayton option's 3-phase alternators can feed the 3 kVac step-up transformer directly. Stirling alternators need an extra converter stage: NASA gives about 90% PMAD efficiency for Brayton against 83% for Stirling.
ProjectOPEN MOON · Self-sustaining lunar colony
DocumentOM-120
Revision1.4 · Draft
EditEdit on GitHub