Fabrication shop
Metal printer
A laser melts metal wire onto a build plate inside a sealed box filled with inert gas.
- Laser source and optics
- Wire feeder and spool store
- Sealed build chamber with nitrogen or argon purge
- Replaceable build plates
- Fume and particle filter
Polymer printers and recycler
Filament printers make plastic parts. A recycler turns failed prints, old parts and packaging back into feedstock.
- Two FFF printers (ABS, ULTEM 9085, HDPE)
- Shredder
- Filament extruder (positrusion type)
- Dry-heat and UV steriliser
- Filament dryer and store
Regolith printer
A small printer mixes regolith with a binder to make tiles, blocks and fixtures; a furnace can sinter them.
- Regolith-binder print head
- Sieved regolith hopper
- Small sintering furnace
- Print bed and enclosure
Machining and finishing
Machine tools bring printed parts to final size and surface finish, and make simple parts from bar stock.
- Compact 5-axis CNC mill
- Lathe
- Band saw and grinder
- Heat-treat oven
- Chip and dust extraction
Inspection and testing
Measures every part and breaks test coupons from every build, so crew know a part is fit to use.
- Coordinate measuring arm and calipers
- Optical microscope
- Tensile and compression test frame
- Hardness tester
- Digital records for each build
Feedstock preparation
Turns lunar metal by-products, regolith and waste plastic into feedstock the printers can use.
- Metal powder sieving and drying
- Metal refining and wire-making (research)
- Regolith sieving and drying
- Packaging collection and sorting
What it does
The fab shop makes spare parts, tools, brackets and fittings on site. That way a broken part does not have to wait for the next cargo landing. NASA notes that, historically, 95% of spares are never used, yet it is impossible to know in advance which ones will be needed4. Making parts on demand cuts the spares that must be shipped. It is also how M12 reaches ≥50% of spare-part mass made on site.
How it works
Metal printer. ESA’s Metal 3D Printer on the ISS was built by an Airbus-led team. A high-power laser melts stainless-steel wire inside a fully sealed box. The box’s oxygen is replaced with nitrogen so the hot metal does not oxidise. The unit is about 180 kg. Its test prints are each under 250 g and take two to four weeks. Noise rules limit printing to four hours a day1. It printed the first metal part in space in 20242. By July 2026 it had made a fifth sample. Three samples were being compared with ground prints at ESTEC and DTU, and one print had been halted after an anomaly3.
Polymers and recycling. NASA’s first ISS printer made 55 ABS specimens. NASA saw no engineering-significant effect of microgravity on the results5. The Additive Manufacturing Facility (AMF) prints ABS, ULTEM 9085 and HDPE4. The Refabricator, built by Tethers Unlimited, is a printer and recycler that turns ULTEM parts back into filament. Its test plan was seven print-and-recycle cycles, with five tensile specimens per cycle returned to Earth for testing5. ERASMUS adds dry-heat and UV sterilisation, so recycled plastic can be used for medical and food items4.
Regolith printer. Redwire’s Regolith Print used the AMF on the ISS to test printing with a regolith simulant in microgravity6.
Machining. Printed metal parts need finishing. NASA has funded Vulcan, which combines wire-and-arc printing with a 5-axis CNC mill. It has printed titanium and aluminium. NASA has also funded MAMBA, which presses scrap into ingots and then mills them4. NASA’s FabLab target for one ISS rack was 2,000 W, 576 lb and 16 ft³, with built-in inspection4.
Inspection and testing. NASA-STD-6030 sets the rules for additively manufactured flight parts, including witness specimens built alongside the parts7. The shop prints coupons with every build and pulls them on its own tensile frame.
Lunar feedstock. ESA’s molten-salt process works at 950 °C. It leaves behind a mix of metals, and whether that mix can be printed directly or must be refined first is still open8. Blue Origin reports making wire from simulant with molten regolith electrolysis9. Highland regolith is ~24% Al₂O₃ and ~5.9% FeO10, so aluminium is the likelier local metal at the pole.
Sizing (ESTIMATE)
| Item | Working |
|---|---|
| Output target | 1 t/yr ÷ 365 ≈ 2.7 kg/day of parts |
| ESA ISS printer rate | <250 g per 2–4 weeks1 ≈ ~10 g/day |
| Gap | 2.7 kg ÷ 10 g ≈ 270×. The lunar shop needs faster, larger printers plus machining from bar stock. |
| Peak power | metal printer 2 kW (FabLab class4) + CNC 3 kW + furnace 3 kW + the rest 2 kW ≈ 10 kW |
| Mass | printer ~1 t + machine tools ~1 t + polymer and recycler ~0.3 t + test lab ~0.6 t + feedstock prep ~1 t + starter feedstock ~1 t ≈ 5 t |
Testing and qualification
- Qualify each machine on Earth with the same feedstock and procedures. Build a database of material properties (NASA-STD-6030 approach7).
- Fly a copy of each process on the ISS or an early lander, where possible, and compare the results with ground prints, as ESA is doing3.
- On the Moon, print and test reference coupons before making any real part.
- Make non-critical parts first, then move to load-bearing ones as the data grows.
- Bring in lunar feedstock one material at a time, with tensile tests on every batch.
Open questions
- Which lunar alloy from FFC or MRE by-products is good enough to print, and how much refining does it need?
- How fast can a crew-safe, sealed metal printer run on the Moon?
- How much strength does recycled ULTEM lose per cycle? Are results from the ISS Refabricator available?
- Which spare parts make up most of the mass, and can they be printed?
| Severity | Problem | Solution |
|---|---|---|
| High | Metal printing in space is barely demonstrated: ISS prints are under 250 g and take weeks | Use Earth-qualified printers built for higher rates; keep CNC machining as a backup; scale up only after test data. |
| High | Lunar process metal is a mixed alloy whose usefulness is unknown | Start with Earth wire; test and refine local metal batch by batch; use it first for non-critical parts. |
| High | A weak printed part could fail in a life-critical system | Witness coupons and tensile tests for every build; use printed parts only in non-critical roles until a database of properties exists. |
| Medium | Electronics and precision parts cannot be made locally | Ship electronics; make structures, brackets, enclosures and tools locally. |
| Medium | Fumes, fine powder, lasers and noise in a closed habitat | Sealed printer box with inert gas; filtered extraction; separate shop module with sound insulation. |
| Medium | No published results yet on how recycled ISS plastic held up | Run recycle-and-test cycles on the ground and in the shop; track strength over each cycle. |
| Medium | Metal chips and dust float longer and spread further in 1/6 g | Fully enclosed machines; dry machining with vacuum extraction; clean-room-style housekeeping. |
Specification
| Location | One pressurised module bay, ~30 m² floor (ESTIMATE) |
| Metal process | Wire-fed laser printing in a sealed inert-gas box (ESA ISS printer heritage) |
| Polymer materials | ABS, ULTEM 9085, HDPE (ISS AMF materials) |
| Recycling | Used parts and packaging back to filament (Refabricator heritage) |
| Output target | ~1 t of parts per year (plan design target, ESTIMATE) |
| Power | ~10 kW peak, ~3 kW average (ESTIMATE) |
| Delivered mass | ~5 t with 1 t of starter feedstock (ESTIMATE) |
| Quality control | Witness coupons with every build; on-site tensile testing |
| Feedstock | Earth wire and filament first; lunar metals and recycled plastics later |
Sources
- ESA: ESA launches first metal 3D printer to ISS (Jan 2024)
- ESA: ESA 3D prints first metal part on the ISS (Sep 2024)
- ESA: 3D-printed metal, unlocking crew autonomy (Jul 2026)
- NASA NTRS 20190030402: Overview of the In-Space Manufacturing technology portfolio (Jul 2019)
- NASA NTRS 20180006405: In-Space Manufacturing at NASA Marshall (AIAA SPACE 2018) (2018)
- Redwire: Redwire to demonstrate in-space additive manufacturing for lunar surface on the ISS (Jul 2021)
- NASA-STD-6030: Additive manufacturing requirements for spaceflight systems (Apr 2021)
- ESA: ESA opens oxygen plant making air out of moondust (Jan 2020)
- Blue Origin: Blue Alchemist powers our lunar future (Feb 2023)
- Geology of the Moon (regolith composition), Wikipedia (accessed Nov 2026)