PLAN REV 1.2MILESTONES 14COMPONENTS 26UPDATED 2026-11-17LICENSE CC BY-SA 4.0
C06.1 · Component of M06

Oxygen-from-regolith pilot plant

A pilot plant that melts lunar regolith and splits oxygen out of it with electricity (molten regolith electrolysis), with a carbothermal reactor as backup. It proves that rock can supply breathing oxygen and propellant before anyone depends on it.
Sub-components · 7
1

Feedstock handling and beneficiation

Takes regolith from the M05 stockpile, sieves it, and feeds a measured batch into each reactor.

  • Hopper and loader interface
  • Vibrating sieve (rejects rocks)
  • Magnetic or size separator (optional)
  • Mass-metering feeder
  • Dust-sealed feed valve
BASIS: Sierra Space automated regolith feed in TVAC (2024) · TRL 5
2

Reactor and crucible

An insulated vessel in which regolith is heated to melting and then kept molten by the electrolysis current itself.

  • Start-up heaters
  • Refractory lining or cold-wall (frozen regolith) shell
  • Thermocouples in the melt
  • Thermal shield and radiator
  • Vacuum-tight lid
BASIS: NASA KSC and Lunar Resources LR-1 reactor (25 kg melt) · TRL 4
3

Electrodes

An inert anode where oxygen gas forms and a molten metal cathode pool where metals collect.

  • Inert anode assembly
  • Molten metal cathode pool
  • High-current leads and bus bars
  • DC power supply (~45 V class)
  • Spare electrode sets
BASIS: LR-1 electrolysis at 45 V, 210 A · TRL 4
4

Gas handling and purification

Collects the oxygen leaving the melt, removes dust and other gases, measures it, and compresses it.

  • Hot gas off-take and dust filter
  • Gas cooler
  • Oxygen sensor and residual gas analyser
  • Clean-up bed for other volatiles
  • Compressor and accumulator
BASIS: KSC Volatile Monitoring and Oxygen Measurement System (VMOMS) · TRL 4
5

Liquefaction hand-off

Delivers clean, dry oxygen gas to the 90 K cryocooler and tanks of C06.3.

  • Pressure regulator
  • Dew-point and purity check
  • Isolation valves
  • Flow meter
BASIS: NASA 90 K reverse turbo-Brayton cryocooler programme · TRL 5
6

Slag and metal removal

Empties spent slag and the metal (iron, silicon and others) after each batch so the reactor can be reused.

  • Tap hole or tilting crucible
  • Cooling tray
  • Slag crusher
  • Metal ingot store for M12
BASIS: Sierra Space spent-regolith removal; MRE tapping not yet shown · TRL 3
7

Power, thermal and control

Takes power from the M04 grid, rejects waste heat, and runs the batch cycle without crew.

  • Grid interface and DC converters
  • Radiators
  • Process controller and data logger
  • Fault protection (power loss, over-temperature)
  • Cameras
BASIS: LR-1 data acquisition and control system · TRL 5
Engineering notes

What it does

Lunar rock and soil is about 41–45% oxygen by mass5, but the oxygen is locked in minerals. This plant melts regolith and passes an electric current through the melt. Oxygen gas forms at the anode and metals collect at the cathode1. A carbothermal reactor flies alongside as a backup, so one process failing does not stop oxygen production.

How it works

Feedstock. Sieved regolith from the M05 stockpile is metered into the reactor. Sierra Space’s carbothermal reactor has already shown automated regolith feed, processing and removal of spent material in a dusty thermal-vacuum chamber at NASA JSC2.

Reactor and electrodes. In NASA and Lunar Resources’ 2024 ground test, heaters brought 25 kg of simulant to about 1,300 °C. Electrolysis then started at 45 V. The current itself kept the melt hot (Joule heating), pushing it beyond 1,700 °C. The run lasted 9 hours at 45 V and 210 A, and made oxygen at an average of 0.07 kg/h. That is 2.3% of the melt by weight1. Peak power draw was about 9 kW1. Blue Origin’s Blue Alchemist, also a molten regolith process, passed its critical design review in September 20253.

Gas handling. In the ground test, gas samples reached up to 80% oxygen by volume1. So the gas must be cleaned. NASA lists gas clean-up, compression and accumulators as the next subsystems to develop1.

Liquefaction hand-off. Clean oxygen goes to the 90 K cryocooler in C06.3. NASA puts the need for in-situ oxygen liquefaction at about 150 W of cooling at 90 K7.

Slag and metal removal. After each batch, slag and metal must leave the reactor. NASA lists “feed and removal” and reactor reusability as future work for molten regolith electrolysis1. This is the least mature part.

Backup. The carbothermal reactor runs at about 1,800 °C and reached TRL 6 in 2024 tests2. A NASA study of a 10 t per year carbothermal system estimated 11.8 kWe plus 33.3 kW of direct solar heat, using methane that is recycled6.

Sizing

All rows are this plan’s arithmetic (ESTIMATE).

Item Working Result
Rate 10,000 kg ÷ 8,766 h 1.14 kg/h
Current 4 electrons per O₂; 1,000 A gives 1,000 × 3,600 ÷ 96,485 ÷ 4 × 0.032 kg 0.30 kg/h per 1,000 A, so ≥3,800 A total
Power, study basis 25.83 kW ÷ 1.63 kg/h4 = 15.8 kWh/kg; × 1.14 kg/h ~18 kW
Power, demo basis 0.3 mol O₂ per kWh1 = 9.6 g/kWh = 104 kWh/kg; × 1.14 kg/h ~120 kW
Feedstock at 2.3% yield 10 t ÷ 0.023 435 t/yr
Feedstock at 10% / 20% yield (design targets) 10 t ÷ 0.10; 10 t ÷ 0.20 100 / 50 t/yr
Liquefaction heat 0.918 kJ/kg·K × 210 K + 213 kJ/kg8 = 406 kJ/kg; × 1.14 kg/h ~130 W at 90 K

Design choice: four electrolysis cells of about 1,000 A each, plus one spare. The gap between 18 kW and 120 kW is the single biggest unknown. With 26 kW at demo efficiency, output would be about 0.25 kg/h, or roughly 2 t a year.

Testing and qualification

  1. Run a full-size cell on simulant matched to M01 data, in vacuum, for at least 1,000 hours. Measure kWh/kg, current efficiency and wear.
  2. Demonstrate slag and metal tapping and reuse of the same crucible for at least 20 batches.
  3. Test freeze and restart after a simulated power loss.
  4. Qualify the integrated plant (feed, cells, gas train, controls) in a dusty thermal-vacuum chamber.
  5. On the Moon, commission one cell, then add cells one at a time. Run for six months and publish all data.

Open questions

  • What anode material survives months in molten regolith, and how fast does it wear?
  • Does energy per kg fall toward the study figure as the reactor gets bigger?
  • Is beneficiation worth its mass, or should raw sieved regolith go straight in?
  • Can metal from the cathode be tapped cleanly enough to be useful to M12?
  • How much carbon does the carbothermal backup lose per tonne of oxygen?
Problems and solutions · 8
SeverityProblemSolution
CriticalEnergy per kg in the 2024 demo (~100–135 kWh/kg) is far above the NASA study figure (~16 kWh/kg); at demo efficiency the pilot would make only ~2 t a year on 26 kWGround-test a full-size cell before flight and publish kWh/kg; fly the carbothermal backup; size M11 only from measured numbers
HighAnode and crucible wear at 1,600–1,700 °C limits lifeCarry spare electrode sets; design for robotic change-out; measure wear rate in a 6-month ground run
HighPower loss freezes the melt around the electrodesBattery ride-through for a controlled shutdown; treat each batch as able to freeze and restart; test freeze-restart cycles on the ground
HighHot, pure oxygen can ignite metals and sealsOxygen-compatible materials only; clean-for-oxygen assembly; flow limits and pressure relief in the gas train
MediumNo MRE reactor has yet tapped slag or metal and been reusedMake slag and metal removal a required ground-test step; accept single-use crucibles for the first batches if needed
MediumRegolith at the site may differ from the simulant used in testsUse M01 soil data to make simulant; measure yield for each batch on the Moon
MediumCarbothermal backup needs a carbon carrier that must be recycledMeasure carbon losses in ground tests; carry a top-up supply sized from those tests
MediumCommercial programmes (Lunar Resources, Blue Alchemist, Sierra Space) may slip or stopKeep two processes from two suppliers; open interface specs for feed, power and gas off-take

Specification

Output target10 t O₂ per year (about 1.14 kg/h)
Primary processMolten regolith electrolysis, melt at about 1,600 °C
Backup processCarbothermal reduction, about 1,800 °C
Cell currentAt least ~3,800 A in total across all cells (Faraday's law, ESTIMATE)
Power~18 kW if the NASA study figure holds; ~120 kW at today's demo efficiency (see Sizing)
Feedstock50–435 t of regolith per year, depending on yield (ESTIMATE)
Mass~3 t delivered (M06 ESTIMATE)
Life6 months continuous operation, with electrode and crucible change-out
Delivery classMedium lander
Technology readiness · TRL 4 / 9

Sources

  1. NASA NTRS: Large-scale demonstration of molten regolith electrolysis for oxygen production in a relevant environment (ICES 2026) (2026)
  2. NASA NTRS 20250004151: Carbothermal oxygen production reactor testing (2025)
  3. Blue Origin: Blue Alchemist hits major milestone (Sep 2025)
  4. Colozza, NASA/CR: ISRU plant power (1.63 kg/h O₂ at 25.83 kW) (Mar 2020)
  5. WUSTL: Chemical composition of lunar soil ()
  6. Kleinhenz and Paz, NASA: Case study for lunar ISRU systems utilizing polar water (ASCEND 2020) (Nov 2020)
  7. Nugent et al., NASA: Space exploration applications for development of high capacity cryocoolers (Dec 2020)
  8. Wikipedia: Oxygen (heat of vaporization, heat capacity) ()
ProjectOPEN MOON · Self-sustaining lunar colony
DocumentC06.1
Revision1.2 · Draft
EditEdit on GitHub