Programme set-up and site selection
Choose a primary and a backup site near the lunar south pole that give the most sunlight, an access route to permanently shadowed ice, safe terrain for landing and building, and workable communications with Earth. Set up the open-source engineering programme that runs every later milestone.
| # | Criterion |
|---|---|
| EC-1 | Primary and backup sites chosen, each with a sunlit ridge for solar power within cable distance of a permanently shadowed region (PSR) that may hold ice. |
| EC-2 | Illumination modelled for at least an 18.6-year cycle at mast heights of 0, 10 and 20 m, from LOLA terrain data. |
| EC-3 | Hazard maps (slopes, boulders, craters, young fault scarps) at the best available LROC NAC resolution for every planned landing, pad and building location. |
| EC-4 | Earth-visibility and relay-coverage analysis showing how many hours per month each site can talk to Earth directly. |
| EC-5 | Site plan published openly and notified to other lunar operators under Artemis Accords deconfliction practice. |
Data assembly
Gather every public data set for the south pole into one open GIS.
- LRO LOLA terrain and LROC imagery
- LRO Diviner temperatures
- ShadowCam images inside PSRs
- Chandrayaan-2 DFSAR radar
Illumination and thermal
Model sunlight and temperature hour by hour across years.
- Ray-traced horizon models
- Longest-night statistics per point
- Mast-height trade study
Hazards
Map everything that can tip a lander or a building.
- Slope and roughness maps
- Boulder counts
- Young fault scarps and landslide-prone slopes
Resources
Rank PSRs by likely ice and by how hard they are to reach.
- Neutron and radar hydrogen maps
- ShadowCam ice patches
- Access-road slope to each PSR
Communications geometry
Work out when each site can see Earth and where relay satellites are needed.
- Earth-visibility hours per month
- Relay orbit coverage
- Surface line-of-sight between sites
Programme and legal
Set up the open-source programme and coordinate with other operators.
- Open data and CC BY-SA licensing
- Artemis Accords notification
- Partner and procurement strategy
| Technology | Used for | Status today | TRL |
|---|---|---|---|
| Lunar Reconnaissance Orbiter (LRO)1 | Terrain, imagery, temperature and radar data for site selection | Operating; FY2026 budget request continues operations to support CLPS deliveries, landing-site characterisation and Artemis | 9 |
| ShadowCam on KPLO/Danuri2 | Images inside permanently shadowed craters | Operating in extended mission; expected to end in early 2028 when its battery runs out in a lunar eclipse | 9 |
| Chandrayaan-2 orbiter DFSAR radar3 | Radar evidence of subsurface ice | DFSAR data showed possible subsurface ice under four doubly shadowed craters (ISRO, May 2026) | 9 |
| NASA Artemis south-pole candidate regions4 | Starting shortlist of pre-screened regions | 9 regions published Oct 2024 (for Artemis III) | 9 |
Why the south pole
NASA’s own architecture work explains the choice: near the south pole some ridges are sunlit most of the time, while nearby craters stay permanently in shadow and cold enough to trap water ice7. That pairing, near-constant solar power next to frozen water, is what makes a self-sustaining base possible without inventing new technology. NASA’s 2026 Moon Base programme also targets the south pole12, so a base there can share transport, relays and data.
How sunny is “near-eternal light”?
No point on the Moon is sunlit all the time6. The best points are close:
| Location | Share of the year sunlit | Source |
|---|---|---|
| Shackleton ridge (89.68°S) | ~81% | Bussey et al. 2010, via5 |
| Peaks near Shackleton | ~82% and ~86% | same |
| de Gerlache ridge | ~85% | same |
| Malapert Mountain | ~74% | same |
| Two Shackleton-ridge points ~8 km apart, combined | ~94% | same |
| Best points on the Shackleton–de Gerlache ridge | up to ~90% | LROC6 |
Design consequence: spread solar arrays across two or three nearby high points so that at least one is almost always lit, and raise them on masts. The longest darkness at a single point can still be days long5, so the base still needs storage and fission power (see M04).
Step-by-step
- Build the open site database. Pull LRO LOLA, LROC, Diviner and Mini-RF data1, ShadowCam images2 and Chandrayaan-2 radar products3 into one public GIS.
- Start from NASA’s shortlist. NASA cut its Artemis III list to nine regions in October 2024: Peak near Cabeus B, Haworth, Malapert Massif, Mons Mouton Plateau, Mons Mouton, Nobile Rim 1 and 2, de Gerlache Rim 2 and Slater Plain4. These are already screened for landing safety, light and Earth visibility.
- Model light and temperature hour by hour, for every candidate, at several mast heights.
- Map hazards. Include young fault scarps: NASA-funded work links the shrinking Moon to faults and moonquakes near the south pole, including a scarp in de Gerlache Rim 2, and some shadowed slopes are prone to landslides8.
- Rank ice targets. ShadowCam found little widespread surface ice, but some 20–50 m patches consistent with more than 10% ice2. Ice is patchy, so M01 must confirm it on the ground.
- Check communications. Earth visibility varies from site to site: some Earth-facing areas see Earth almost all the time, others never do7. At the best proposed base site in a JPL study, direct-to-Earth links were available only about 51% of the time13, so relay coverage is a hard requirement.
- Decide, publish and notify. Under the Outer Space Treaty no one can claim territory11. The Artemis Accords (78 signatories after Vietnam joined on 28 October 20269) ask operators to give notice and coordinate to avoid harmful interference9. Open Moon publishes its site plan and follows that practice.
Open question for contributors: which two sites give the best combination of illumination, ice access and distance from other programmes’ planned activity?
| Item | Low | High | Basis |
|---|---|---|---|
| Core engineering team, 2 years | $0.04B | $0.11B | ESTIMATE: 60–150 full-time staff at ~$350k loaded cost per year |
| Computing, data processing, illumination modelling | $0.005B | $0.02B | ESTIMATE |
| Legal, international coordination | $0.005B | $0.02B | ESTIMATE |
| Total | $0.05B | $0.15B | ESTIMATE people and computing only; no flight hardware |
Mission profile
| Window | 2026–2027 |
| Phase | 0 |
| Depends on | |
| Team | Engineering and science core team plus open contributors |
| Hardware | None flown; uses existing orbital data |
| Output | Site certification package, open data set |
| Cost | $0.05–0.15B EST. |
Failure modes · 5
Sources
- NASA FY2026 Budget Technical Supplement (Lunar Reconnaissance Orbiter, PS-28/29) (May 2025)
- Univ. of Hawaii SOEST: Scarce ice in Moon's darkest regions (ShadowCam) (Mar 2026)
- ISRO: Chandrayaan-2 DFSAR observations reveal subsurface ice in lunar south polar regions (May 2026)
- NASA NTRS 20250011660: Artemis III Site Selection Update (2026)
- Peak of eternal light (Bussey et al. 2010; Speyerer & Robinson 2013 figures), Wikipedia (accessed Nov 2026)
- LROC: Islands in the Dark (Shackleton rim illumination) ()
- NASA ACR22 white paper: Why the Lunar South Polar Region (Oct 2023)
- NASA: Shrinking Moon causing moonquakes and faults near lunar south pole (Jan 2024)
- NASA: Artemis Accords (Section 11, deconfliction and safety zones) ()
- NASA: Uzbekistan becomes 77th Artemis Accords signatory (Oct 2026)
- UNOOSA: Outer Space Treaty (Article II) ()
- NASA Moon Base – Phases (2026)
- JPL IPN Progress Report 42-176: Lunar pole illumination and communications maps (Bryant) (Feb 2009)