Regolith radiation shielding
Support arch
A metal vault built over the modules carries the regolith, so the habitat skin never touches it.
- Corrugated aluminium arch segments
- Footings on a graded, compacted pad
- Flexible membrane over the arch
- Load cells and strain gauges
- Geo-mat netting to steepen the outer slopes
Regolith overburden
Loose regolith is dug, carried and piled over the arch, then lightly compacted in layers.
- Excavator fleet (C05.1)
- Layer compaction roller
- Depth survey markers
- Slope profile surveys (lidar)
End walls and entrances
The open ends of the vault are closed with stacked regolith bags and a bent entrance tunnel so radiation has no straight path in.
- Regolith-filled Vectran bags
- Bag filling station
- Dog-leg entrance tunnel
- Dust door at the tunnel mouth
Inspection gallery
A crawl space between the module and the arch lets crew or a small robot check seals, hatches and the hull.
- 0.5–1 m crawl space around each module
- Fixed cameras and lights
- Removable arch access panels
- Small inspection robot on a rail
Thermal pass-through
Buried modules cannot radiate heat, so heat is piped out to radiators on the surface.
- Pumped fluid loop through the overburden
- Surface radiator panels with dust covers
- Insulated pipe sleeves
- Habitat heaters for low-load periods
Dosimetry network
Area monitors, personal dosimeters and a dose-versus-depth test stack measure what the shield really does.
- HERA-class area monitors in each module
- Crew Active Dosimeters (one per person)
- Passive dosimeters for whole-stay totals
- Regolith dose-depth test stack (20 to >100 g/cm²)
- Data link to Earth radiation team
What it does
Unshielded, the lunar surface gives about 1,369 µSv per day1. That is about 246 mSv in a six-month stay, against NASA’s 600 mSv career limit3. This component puts a thick layer of regolith between the crew and the sky. The same layer also steadies the temperature and stops micrometeoroids.
How much regolith? There is no single NASA number
NASA has not set a design depth for regolith shielding. The published work points in different directions:
- Thin shields. NASA guidance is to surround crew with about 20 g/cm² of hydrogen-rich material. Adding more non-hydrogen material beyond that can raise the dose, unless you add metres of it, as in a buried habitat4.
- One OLTARIS study. Dose rose with regolith depth up to about 1 m, because of secondary particles. The study concluded that at least 2 m is needed. That gives about 150 mSv per 180-day mission, and 3 m gives about 100 mSv. These figures assume no EVA2.
- NASA Lunar Safe Haven study. It used a 3 m threshold and a 7 m goal6.
- Data gap. NASA lists dose behind more than 100 g/cm² as unmeasured. It proposes a lunar test that puts a detector under thicker and thicker layers of regolith5.
Open Moon keeps M09’s working value of ≥2 m everywhere. It builds 3 m over the sleeping quarters, because sleep is where crew spend the most hours. It then checks the result with OLTARIS and with measurements.
How it works
Support arch. Following NASA’s Lunar Safe Haven baseline, a delivered metal structure is built over the habitat and regolith is piled on top. The regolith never touches the habitat skin, and the outside of the habitat stays reachable for maintenance6.
Placement. The study found that loose regolith works without any processing. It also found that digging and dumping need little power, generally under 200 W6. The study team took the angle of repose to be about 55°. Geo-mats could steepen the slopes and shrink the footprint6.
End walls. The study looked at Vectran sandbags, but noted that no system for filling them exists yet6. Open Moon uses bags only to close the vault ends.
Thermal. Apollo heat-flow sensors below 90 cm read within about 0.1 K of their December 1974 values when checked in 19758. So a buried module sits in a nearly constant temperature. However, it cannot radiate its own heat, so it needs radiators on the surface.
Micrometeoroids. A NASA study found that impact risk drives wall thickness and burial depth9. The Lunar Safe Haven study says thick regolith gives ample micrometeorite protection. It rejected an ISS-style Whipple shield (about 11.5 cm thick) as the only protection, because it stops too little radiation6.
Dosimetry. HERA area monitors and Crew Active Dosimeters were tested on the ISS and flew on Artemis I10.
Sizing (ESTIMATE)
The arch’s clear space is 5 m × 4.5 m × 26 m. The slopes are 45°, which is more conservative than 55°. Placed regolith is taken as 1.5 g/cm³. For comparison, natural regolith is 1.30 g/cm³ at the surface and 1.52 g/cm³ at 10 cm depth7.
| Cover | Volume | Mass | Days at 4 × 200 kg/h | Days at 4 × 42 kg/h (IPEx target11) |
|---|---|---|---|---|
| 2 m | ~2,900 m³ | ~4,300 t | ~225 | ~1,070 |
| 3 m | ~4,550 m³ | ~6,800 t | ~355 | ~1,690 |
Load on the arch: 3 m × 1,500 kg/m³ × 1.62 m/s² ≈ 7.3 kPa (4.9 kPa at 2 m).
Testing and qualification
- Load-test a full-scale arch segment on Earth to 2× the 3 m load, with simulated moonquake shaking.
- Pile simulant over a mock-up and measure the slopes and how the layers settle.
- Model the full geometry in OLTARIS4.
- On the Moon, fly the dose-depth stack first5.
- Build the arch, bury it, and survey the depth.
- Compare the HERA readings inside with the readings outside before crew move in.
Open questions
- How deep is deep enough? Can a measured dose-depth curve be produced before 2034?
- Does the 1 m secondary-radiation peak appear for real south-pole regolith?
- What angle of repose does excavated polar regolith hold in practice?
- How many six-month rotations can one person fly within 600 mSv once EVA dose is added?
| Severity | Problem | Solution |
|---|---|---|
| Critical | At 2 m, one model gives ~150 mSv per six-month stay, so four rotations reach the 600 mSv career limit even with no EVA | Build 3 m on the roof where people sleep; run OLTARIS on the real geometry; give each person a dose budget and cap their number of rotations. |
| High | No measured dose-depth data exists beyond ~100 g/cm², and studies disagree (2 m minimum vs 3–7 m) | Fly the regolith dose-depth test stack before crew arrive; measure inside the finished shield; add depth if numbers are worse than models. |
| High | Burial is slow: ~1 year with 4 excavators at 200 kg/h, ~3–5 years at the IPEx design rate | Start piling as soon as the arch is up, before crew; add excavators; use the storm shelter (C09.2) until the cover is complete. |
| High | Arch failure would drop tonnes of regolith onto a pressurised module | Design the arch to carry the full load on its own with margin; monitor load cells; add regolith in even layers on both sides. |
| Medium | A buried hull cannot be seen or repaired | Keep the inspection gallery and access panels; never pile regolith directly on the module. |
| Medium | Buried modules overheat because they cannot radiate | Surface radiators on a pumped loop; size them before burial; keep heaters for low-power periods. |
| Medium | No lunar bag-filling system exists yet | Use bulk regolith for most of the cover; limit bags to end walls; develop and test a filler on Earth first. |
| Medium | Dust gets into the gallery and entrance | Dust door at the tunnel mouth; membrane over the arch; sintered ground at the entrance. |
Specification
| Cover depth | ≥2 m everywhere, 3 m on the roof (plan design choice) |
| Areal density | ~300 g/cm² at 2 m, ~450 g/cm² at 3 m (ESTIMATE, 1.5 g/cm³ placed regolith) |
| Modelled dose inside | ~150 mSv per 180 days at 2 m, ~100 mSv at 3 m (one OLTARIS study, no EVA) |
| Regolith moved | ~4,300 t (2 m) to ~6,800 t (3 m) for 3 modules (ESTIMATE) |
| Placement time | ~225–355 days with 4 excavators at 200 kg/h each (ESTIMATE) |
| Static load on arch | ~4.9 kPa (2 m) to ~7.3 kPa (3 m) (ESTIMATE) |
| Arch structure mass | ~10 t (ESTIMATE, ~330 m² at ~30 kg/m²) |
| Clear envelope | 5 m wide × 4.5 m high × 26 m long over 3 modules (plan design choice) |
| Design life | ≥10 years (matches the habitat module life) |
| Delivery | Arch and dosimetry on one heavy cargo lander; regolith is local |
Sources
- Zhang et al., Science Advances: first measurements of the radiation dose on the lunar surface (Chang'e-4) (Sep 2020)
- Savage, IAC-24 abstract: Radiation shielding for long-term lunar settlements with regolith (OLTARIS, BON2020) (2024)
- NASA OCHMO-TB-020: Design for ionizing radiation protection (NASA-STD-3001 technical brief) (Dec 2022)
- Clowdsley, NASA LaRC: Protecting astronauts from space radiation on the lunar surface (LSIC talk) (Feb 2021)
- Simonsen and Slaba, NASA: Galactic cosmic radiation shielding, science on the lunar surface (NASEM) (2025)
- Grande et al., NASA: Protecting crew and surface systems with a long-duration Lunar Safe Haven (ASCEND 2021) (2021)
- Connolly, NASA JSC: An engineering guide to lunar geotechnical properties (2023)
- Nagihara et al., LPSC 2015: Restoration of the Apollo heat flow experiments metadata (2015)
- Evans et al., NASA MSFC: Meteoroid risk assessment of lunar habitat concepts (2006)
- NASA: Artemis I radiation measurements validate Orion safety for astronauts (Oct 2024)
- NASA NTRS: IPEx TRL 5 design overview (ASCEND 2024) (2024)