Fission surface power unit
A small nuclear reactor that keeps the outpost powered through the two-week lunar night, when solar arrays produce nothing.
Based on real hardware
| Heritage | NASA Kilopower / KRUSTY reactor ground test (2018); NASA Fission Surface Power project |
| Role in the plan | Base-load power for ISRU plant, comms and thermal control |
| Target output | [placeholder] kWe continuous |
| Design life | [placeholder] years without refuelling |
| Delivered by | [placeholder] cargo lander |
Sub-components 5
Reactor core
Uranium fuel, reflector and control system.
- Fuel form
- Neutron reflector
- Control drum actuators
Power conversion
Turns reactor heat into electricity.
- Stirling or Brayton engines
- Heat pipes
- Controllers
Heat rejection
Radiators that dump waste heat to space.
- Radiator panels
- Deployment mechanism
- Dust covers
Radiation shielding
Keeps crew and electronics safe at the outpost.
- Shadow shield
- Regolith berm
- Keep-out zone
Power transmission
Cable and electronics that carry power to the outpost.
- High-voltage cable
- Power management unit
- Cable laying rover
Problems and solutions 4
Lunar night lasts about 14 Earth days
Solar-only outposts must store two weeks of energy. Solution: the reactor provides base load independent of sunlight; batteries cover only peaks.
Abrasive dust on radiators
Dust lowers radiator emissivity. Solution: mount radiators vertically, place the unit away from landing pads, and test electrodynamic dust shields.
Radiation dose at the outpost
Solution: site the reactor at a set distance behind a regolith berm, so the terrain adds shielding.
Launch safety and public approval
Solution: launch with fresh, unirradiated fuel and keep the reactor subcritical until it is on the surface.
Sources
- Kilopower, Wikipedia
- [Source to be added: NASA Fission Surface Power project page]